Yuchai Engine Open Type Genset with High-quality Alloy Cast Iron

STANDARD

ISO 8528: AC generator set driven by reciprocating internal combustion engine

IEC 60034-1: Basic technical requirements for rotating electrical machines

YD/T 502: Communication diesel generator set

GB/T 20136-2006: General test method for internal combustion engine power station

ADVANTAGE

Four-valve, supercharged inter-cooling technology, sufficient combustion, and low fuel consumption.

Adopt the world's advanced electronically controlled high-pressure common rail technology or electronically controlled unit pump technology, with good transient speed regulation and strong loading capacity.

High power density.

High-quality alloy cast iron cylinder block and cylinder head, high reliability.

Good cold start performance, double speed reduction starter, electronic control fuel injection technology, quick start.

Good parts versatility, high degree of serialization, one-cylinder one-head structure, low comprehensive maintenance cost.

Support dual energy startup.

PERFORMANCE

DRAWING

OPERATING ENVIRONMENT

The main power (PRP) is the maximum power that the unit can continuously operate with variable load under standard environment (atmospheric pressure, relative humidity, ambient temperature) conditions, and allow 10% overload operation for 1 hour every 12 hours.

Altitude: ≤1000m (when >1000m, power correction is required)

Ambient temperature: 40°C (when >40°C, power correction is required)

Relative humidity: ≤60%

When the on-site operating conditions of the diesel generating set doesn’t meet the above conditions, the output power of the generator set must be corrected, and finally corrected coefficient, please consult us.