730-1200kW 10500V Open Dongkang Cummins Engine Diesel Generator in Quickly Start
PT fuel injection system
Start quickly and reliably
High-performance shock absorption
Low fuel consumption
- ISO 8528: AC generator set driven by reciprocating internal combustion engine
- IEC 60034-1: Basic technical requirements for rotating electrical machines
- YD/T 502: communication diesel generator set
- GB/T 20136-2006: General test method for internal combustion engine power station
- PT fuel injection system constitutes EFC electronic governor, realizes remote operation control, and can be put into full load at one time according to rated power.
- Start quickly and reliably at low temperatures, reduce exhaust gas emissions, and make the emissions meet the national standards.
- Adopt advanced technology to optimize the combustion process, reduce fuel consumption and higher reliability.
- High-performance shock absorption system and rigid base, low vibration.
- Low fuel consumption, low failure rate, lower cost, high economy and safety.
- Standardized design, comprehensive and intelligent products, strong versatility of parts and components, convenient installation and easy maintenance.
Steady-state frequency band
Relative frequency setting drop range
Relative frequency setting rising range
Transient frequency deviation
100% sudden reduction power
Frequency recovery time
Relative frequency tolerance band
Steady-state voltage deviation
Transient voltage deviation
100% sudden reduction power
Voltage recovery time
Relative voltage setting range
Voltage setting rate of change
Telephone harmonic factor
Phone influencing factors
The main power (PRP) is the maximum power that the unit can continuously operate with variable load under standard environment (atmospheric pressure, relative humidity, ambient temperature) conditions, and allow 10% overload operation for 1 hour every 12 hours.
- Altitude: ≤1000m (when >1000m, power correction is required)
- Ambient temperature: 40°C (when >40°C, power correction is required)
- Relative humidity: ≤60%
- When the on-site operating conditions of the diesel generating set doesn’t meet the above conditions, the output power of the generator set must be corrected, and finally corrected coefficient, please consult us.
|Genset Model||Genset Prime Power(kW)||Genset Standby Power(kW)||Power Factor||Rated Voltage||Frequency||Dimension (L×W×H) (mm)||Weight(kg)||Engine Model||Number of Cylinders||Bore×Stroke(mm)||Displacement(L)||Fuel Consumption(g/kW)||Speed||Cooling System||Starting Method|
|Chongkang Cummins Generator|
|ATYOH-C730C||730||800||0.8||400V||50HZ||5160L×1770W×2340H||10500||KTA38-G2A||12||159*159||38.000||<210||1500||Water Cooling||Electrical Starting|
|ATYOH-C800C||800||880||0.8||400V||50HZ||5160L×1770W×2400H||10500||KTA38-G5||12||159*159||38.000||<210||1500||Water Cooling||Electrical Starting|
|ATYOH-C1000C||1000||1100||0.8||400V||50HZ||5760L×2010W×2460H||12100||KTA50-G3||16||159*159||50.000||<215||1500||Water Cooling||Electrical Starting|
|ATYOH-C1000CG||1000||1100||0.8||400V||50HZ||5760L×2200W×2366H||10800||QSK38-G5||12||159*159||37.700||<210||1500||Water Cooling||Electrical Starting|
|ATYOH-C1100C||1100||1200||0.8||400V||50HZ||6250L×2010W×2440H||13200||KTA50-G8||16||159*159||50.300||<220||1500||Water Cooling||Electrical Starting|
|ATYOH-C1200C||1200||1320||0.8||400V||50HZ||6150L×2010W×2570H||13300||KTA50-GS8||16||159*159||50.000||<220||1500||Water Cooling||Electrical Starting|