570-1200kW 400V Slient Imported Cummins Engine Diesel Generator in Remote Operation Control

STANDARD

ISO 8528: AC generator set driven by reciprocating internal combustion engine

IEC 60034-1: Basic technical requirements for rotating electrical machines

YD/T 502: communication diesel generator set

GB/T 20136-2006: General test method for internal combustion engine power station

ADVANTAGE

The PT fuel injection system constitutes an EFC electronic governor to realize remote operation control.

Adopt advanced technology to optimize the combustion process, reduce fuel consumption and higher reliability.

Adopting a fully enclosed noise reduction design and an integrated impedance silencing system, which can reduce the noise of the unit by 15～35dB(A), and the overall noise of the unit is low.

Adopt labyrinth air duct structure and dustproof design to balance the different requirements of ventilation and waterproof and dustproof. At the same time, it has been verified by repeated rain test and dustproof test. The standard protection grade is IP23, and the highest can reach IP54.

Using high-quality steel and surface spraying treatment, it has strong anti-corrosion and anti-rust properties. Secondly, the surface treatment process has passed the salt spray test demonstration, and the standard meets the C3 level of anti-corrosion, and the highest level of C5-M anti-corrosion requirements.

PERFORMANCE

DRAWING

OPERATING ENVIRONMENT

The main power (PRP) is the maximum power that the unit can continuously operate with variable load under standard environment (atmospheric pressure, relative humidity, ambient temperature) conditions, and allow 10% overload operation for 1 hour every 12 hours.

Altitude: ≤1000m (when >1000m, power correction is required)

Ambient temperature: 40°C (when >40°C, power correction is required)

Relative humidity: ≤60%

When the on-site operating conditions of the diesel generating set doesn’t meet the above conditions, the output power of the generator set must be corrected, and finally corrected coefficient, please consult us.